Dbl.plate Mekano DP-250x20-CC200-M10 SS
OS item no.: 79559/Hilti item no.: 2325607
Doubling plates for welding to the structure to then attach bolted starter brackets and instrument stand or equipment tower on top. Available as standard or with hole for cable transit that is compatible with Hilti Plug seal CFS-T RRS 50 GS 60mm.
The structural stability of the equipment stand is dependent upon the capacity of the base structure. It is therefore important to consider the doubling plate is sufficiently supported overload bearing structure. In some cases when attaching doubling plate only to thin deck plate, the moment generated by wind and dead loads can cause unwanted movement. Whilst this can be managed by bracing wire or supports, good design of the doubling plate junction to structure can prevent this.
Doubling plate for attaching bolted starter bracket or instrument stand/equipment tower on top.
Product name | Part no. | Quantity |
---|---|---|
Dbl.plate Mekano DP-250x20CC200-M10PT SS | #79556 | 1 STK |
Hexagon bolt BO-HX-M10x20 A4 | #1371325 | 4 STK |
![](https://www.oglaend-system.com/getfile.php/139199-1670488934/Produkter/Bilder/79558_R.jpg)
Product variants
Filter product
74345
Dbl.plate Mekano DP-ST-WD-100x20 SS
74346
Dbl.plate Mekano DP-ST-WD-150x20 SS
74347
Dbl.plate Mekano DP-ST-WD-200x20 SS
55276
Dbl.palte Mekano DP-200x20-CC125-M10 SS
79558
Dbl.plate Mekano DP-200x20-CC150-M10 SS
79559
Dbl.plate Mekano DP-250x20-CC200-M10 SS
Selected
79560
Dbl.plate Mekano DP-300x20-CC250-M12 SS
Characteristics
Name | Value |
---|---|
T Material Thickness (mm) | 20 |
Weight (kg) | 10.100 |
X (mm) | 250 |
Z (mm) | 250 |
CC (mm) | 200 |
Hole size A | 10 |
Type | Doubling plate with threaded holes |
Lt Length Threads (mm) | 15 |
HEXAGON S3D | YES |
ETIM class | EC001004 - Mounting plate for cable support system |
![](https://www.oglaend-system.com/getfile.php/1320675-1670488936/Produkter/Bilder/S-M_PL-CC-XXX.jpg%20%28content%29.jpg)
Downloads
Name | Classification | Size |
---|---|---|
User Guide | 218 kB |